耐蚀理化板 清洁保养

　　1， 请勿将此材料长期放置在温度超过135℃的环境下。

　　2， 请勿将此材料暴露于明火，熔融金属，金属火化或直射阳光下，也不能用作切剁的表面。

　　3， 煤气灯或酒精灯的火焰会损坏本产品的表面，故煤气灯或酒精灯需置于三脚架上使用。

　　4， 耐蚀理化板表面建议采用温水，丙酮或性质温和的清洁剂清洗(可选那些用来洗手或洗碗的清洁剂)，不要选含强酸成分的清洁剂以免损伤表面。对于顽固的污渍，可将次氯酸滴于污染的耐蚀理化板表面后用清水洗尽。

　　1， Do not subject these laminates to extreme in humidity or to a temperatures over 135℃ for sustained periods of time.

　　2， Chemsurf should not be exposed to flame, molten metal, metallic sparks or intense, direct sunlight, nor should it be used as cutting surfaces.

　　3， Chemsurf laminate can be damaged by flame from Bunsen burners. The burners should be placed on a trivet to protect the laminate surface.

　　4， Wilsonart Chemsurf may be cleaned with warm water and mild soaps, such as those used for hands or dishes. The use of cleansers that contain abrasives or strong acids may damage the decorative surface. Stubborn stains may be removed with a 1.5 minute exposure to hypochlorite bleach, followed by a clean water rinse.